Neutral Tile Cleaner Archives - South East London Tile Doctor

Encaustic Tiled Bathroom Renovation Blackheath SE3

Grout-Stained Encaustic Floor Tiles Renovated in a Blackheath Bathroom

My customer recently had a new bathroom installed in their apartment in Blackheath London, SE3, including all new wall and floor tiles. The tiles they chose for the floor were encaustic cement and laid in a geometric pattern. Unfortunately this type of tile is very porous and because they had not been fully sealed before grouting the Black grout stained the tiles. This made them look dirty and despite great efforts to clean them by the owner nothing appeared to work.

Encaustic Tiled Bathroom Floor Before Cleaning Blackheath SE3

This is a far too common problem; many installers mistake the tiles for ceramic which are glazed and very easy to install. To rectify it requires the tiles to be burnished with different grades of diamond pad, and then sealed to protect them going forward.

I informed the customer what the process would be and worked out a quote for the renovation. Happy that the problem would be resolved the job was booked in.

Cleaning an Encaustic Tiled Bathroom Floor

Work started with the application of a coarse 200-grit diamond pad fitted to a rotary machine. Water is used to lubricate the process and the pad is worked across the floor making sure that it contacts every part of each tile. Once I had covered the whole floor in this manner the now dirty water was extracted with a wet vacuum.

Encaustic Tiled Floor During Cleaning Blackheath SE3

Encaustic Tiled Floor During Sealing Blackheath SE3

This process was then repeated with a full set of diamond burnishing pads with grits from 400 to 3000. These pads gradually refine the tile and slowly build-up a polish on its surface.
The last 3000 grit-pad is applied dry with only a small amount of water sprayed on to the tile thereby leaving the floor dry.

Sealing an Encaustic Tiled Bathroom Floor

The floor was then sealed later that day using four coats of Tile Doctor Ultra-Seal to ensure it was fully sealed. Ultra-Seal is a natural look sealer that works by soaking into the tiles occupying the pores and thereby preventing dirt from becoming ingrained there. This ensure dirt and liquids remain on the surface where they can be easily removed.

The burnishing removed the staining and added a lovely subtle sheen to the tile. My customer was very pleased with the result and relieved that the problem had been resolved.

Encaustic Tiled Bathroom Floor After Renovation Blackheath SE3

As long as the sealer remains in place it will ensure they remain easy to clean however you need to be careful what product you clean them with as strong bleach based cleaners will damage the sealer. For this floor I would recommend Tile Doctor Stone Soap which is a gentle yet effective Tile Cleaner that helps maintain the patina on polished tiles.

Professional Restoration of an Encaustic Tiled Bathroom Floor in North Essex

Grout-Stained Encaustic Floor Tiles Renovated in a Blackheath Bathroom Read More »

Victorian Tiled Path Restoration Lewisham

Dilapidated Red and Black Victorian Tiled Path Restored in Lewisham

1 Comment / Lewisham Tile Cleaning, Victorian Tile Cleaning / Jason Gates

This customer contacted Tile Doctor about the dilapidated Victorian tiled path that led up to their property in in Lewisham. It was in quite a state as your can see from the photographs on this page, tree roots had lifted the tiles in certain areas and there were a lot of loose tiles. Intrigued I offered to come and take a look and see what could be done.

After visiting the property, I could see that as well as tiling, some repairs to the foundation due to the tree roots would be needed but generally the path was in solid condition. Also, there was still a good fall to the path so rainwater would drain away easily.

Victorian Tiled Path Before Restoration Lewisham

Before becoming a Tile Doctor my trade was tiling so I wasn’t put off by the significant amount of tiling that this project needed. I worked out a quote for the work needed which they were happy to accept and we set a tentative date for my return and hoped for good weather.

Repairing a Victorian Tiled Pathway

The weather was fine so I was able to start work by carefully lifting all the broken and loose tiles and putting them to one side for re-use where possible. This then exposed the path foundation, which needed digging out in in places and backfilling with cement. I also used a grinder to remove any high spots and leave the foundation base as flat as possible.

Victorian Tiled Path During Restoration Lewisham

Next came the tiling which had to match the existing geometrical pattern. I used a combination of the salvaged tiles from earlier which had to be cleaned up and new reproduction tiles that I had managed to source from a specialist supplier. The tiles were laid out dry initially to ensure the pattern was correct and only then were they fixed in place with new adhesive and then grouted. All these repairs may sound straightforward but the work actually took three days to complete.

Deep Cleaning a Victorian Tiled Pathway

The path was then left to set overnight and I returned later to give them a deep clean. To do this I started with a strong combination of Tile Doctor Remove & Go and Nanotech HBU stain remover. This was sprayed onto the path and left to soak in for a good ten to fifteen minutes to give it time to break down the grime and dirt that had built up over the years. The solution was then scrubbed in using a coarse 50-grit diamond pad fitted to a rotary machine.

The dirt released from the tiles was rinsed off and extracted with a wet vacuum and the process repeated, this time with Tile Doctor Acid Gel and a 100-grit then 200-grit diamond pad. This process deep cleans and hones the tile removing ingrained dirt and improving their appearance. The path was rinsed and soiling extracted afterwards, then left to dry off overnight.

Sealing a Victorian Tiled Pathway

The weather held out and I returned the next day to seal the tiles using three coats of Tile Doctor Colour Grow which is a breathable colour enhancing impregnating sealer. Impregnators work by soaking into the pores of the tile, occupying the pores and thereby preventing dirt from becoming ingrained there.

Victorian Tiled Path After Restoration Lewisham

The customer was very pleased with the results and the path has been saved for another 100 years. The new sealer would ensure dirt remains on the surface where it can be easily cleaned away for which I recommended using Tile Doctor Neutral Tile Cleaner.

Professional Restoration of a Victorian Tiled Pathway in Southeast London

Dilapidated Red and Black Victorian Tiled Path Restored in Lewisham Read More »

Victorian Hallway Floor Restoration Hither Green

Carpet Covered Victorian Tiled Hallway Restored in Hither Green

1 Comment / Lewisham Tile Cleaning, Victorian Tile Cleaning / Jason Gates

I was asked to view a Victorian tiled communal hallway floor at a property in Hither Green that serviced two Victorian maisonettes. The original Victorian tiles had been covered in carpet and an underlay for many years and now that had worn through the residents decided to investigate having the original tiles restored.

I went over to the property to inspect the floor and create a plan for its restoration. We pulled the carpet back and discovered that a section of tiles were missing and the gap had been backfilled with a sand cement mix. I didn’t know at this point whether the base was solid or if the tiles around the repair would also need to be lifted and replaced.

The Victorian tiles had also been imprinted with the pattern from the carpet underlay and the carpet had been secured to the floor with gripper and adhesive all of which would need to be removed as part of the restoration.

Victorian Hallway Floor Before Restoration Hither Green

Undaunted with the task at hand I created a quote for this restoration which included replacing the missing tiles with matching replacements then deep cleaning and sealing the tiles to protect them going forward.

Happy with the quote I was given the go-ahead to start the work and pre-order the replacement tiles.

Repairing a Carpet Covered Victorian Tiled Hallway

When I started the work, I found that the base was generally in good condition and solid so not many additional tiles would need to be replaced. I then set about replacing the main body of the tiling and the border where it was needed, using new reproduction geometric tiles. They were as close a match to the original however being newer they were a slightly different shade.

Once all the tiles had been replaced and repaired, I turned my attention to cleaning the floor to remove the staining and years of dirt. I started this with an application of Tile Doctor Remove & Go which is designed to remove sealers and other contaminants. The tiles did not have a visible sealer on them however it did have years of grease and oil that would need to be broken down.

A strong dilution of Remove and go was applied to the tiles and then allowed to dwell and soak in for around half an hour. It was then worked into the floor with a black scrubbing pad fitted to a rotary machine. The dirty solution was then extracted using a wet vacuum.

Next the floor was treated to an acid rinse with an application of Tile Doctor Acid Gel. The acid gel sits on top of the clay-based tiles and doesn’t soak in giving me a longer working time on the tile surface. This was then worked in with soft diamond burnishing pads of 50, 100 and 200-grit. These pads cut into the surface of the tile leaving it very clean but are not strong enough to scratch or change the tile surface. It does however remove the pattern on the tile left by the underlay. The acid will also counter any efflorescent salt issues that may be dormant in the tile which is a common problem with old floors that don’t have the advantage of a damp proof membrane.

Once the acid had been vacuumed up, I rinsed the tiles thoroughly with a steam cleaner, this lifts all the cleaning chemicals out of the tile and dries quickly.

Sealing a Victorian Tiled Hallway

When the floor was totally dry, I set about sealing the tiles which will protect them going forward and ensure that dirt remains on the surface where it easily cleaned away. I use Tile Doctor Colour Grow to seal original Victorian floor tiles, this is an impregnating sealer, that enhances the natural colour of the tiles and leaves the floor with a natural matt finish. Its also fully breathable so will allow moisture to rise through the tile and not become trapped underneath where it could reach out to the walls and cause rising damp.

I applied three coats of Colour Grow, but after the first coat, I noticed that there was a different shade of Red between the new reproduction tiles and the original tiles. As the original tiles were lighter, I applied a coat of Tile Dr “Stone Oil”, to the original tiles only, to help darken them, before applying the third and final coat of Colour Grow.

Victorian Hallway Floor During Restoration Hither Green

The restoration completely transformed the floor and the customers were very happy with the result. For aftercare I recommend they use Tile Doctor Neutral Tile Cleaner, which is safe to use on sealed tiles. Many of the products you find in supermarkets are simply too strong and can remove the sealer so its always best to read the label.

Professional Victorian Tiled Hallway Restoration and Extension in Hither Green

Carpet Covered Victorian Tiled Hallway Restored in Hither Green Read More »

Chinese Slate Kitchen Floor Renovation Keston

Renovating Chinese Slate Kitchen Flooring in Keston BR2

1 Comment / Bromley Tile Cleaning, Grout Cleaning, Slate Tile Cleaning, West Wickham Tile Cleaning / Jason Gates

A client in Keston asked me to freshen up the Chinese Slate floor tiles that had been installed in the Kitchen. Kitchens are the busiest room in the house and overtime the floor had become tired and dull with ingrained dirt, the grout was also stained with dark patches. He had tried cleaning with lots of household products but nothing was improving the appearance.

Dull Chinese Slate Kitchen Floor Before Cleaning Keston

I visited the property to survey the floor and recommend a solution to the problem. I could see the floor had previously been sealed but it had degraded in several areas and in some places, there was no sealer present at all. Consequently, dirt was able to get into the pores of the stone where it is difficult to remove. All these problems detracted from what should be a very beautiful Slate floor.

To demonstrate my point, I picked a small area of tiling and conducted a test clean followed by the application of a fresh sealer; the floor came up well and my client could see that we could improve the floor significantly. Impressed with the different he was happy to go ahead with my quote and we returned the following month to carry out the work.

Deep Cleaning a Chinese Slate Tiled Kitchen Floor

There was an old topical sealer on the Slate which had to be removed first. To do this I like to use a combination of Tile Doctor Remove and Go combined with and Tile Doctor Nanotech HBU. I applied the solution to the tiles and grout and allowed it to soak in and get to work for around thirty minutes. The two products combined create a powerful solution that will remove the old sealer and start to break down the stains in the tile and grout.

After thirty minutes, I added water to the solution and scrubbed, paying particular attention to the grout lines, then I vacuumed up the solution using the wet vacuum we have on board. I then went over the tiles and grout with my steamer to ensure I had rinsed and removed all chemicals.

When dry I could see the grout staining was far too deep to be able to get perfectly clean so I applied a grey Tile Doctor Grout Colourant to the grout lines. As well as refreshing the grout to give a consistent and uniform colour it also seals the grout, protecting it with an epoxy barrier making it much easier to clean and maintain going forward. When the grout colourant was dry it was now time to apply the sealer to the slate.

Sealing a Chinese Slate Tiled Kitchen Floor

I advised the client to switch from a topical sealer to an impregnating sealer that works by soaking into the stone, occupying the pores, and thereby preventing dirt from residing there.

Happy with my recommendation I sealed the slate with Tile Doctor Colour Grow which as its name suggests contains a colour enhancing formular that it perfect highlighting the natural colours in Chinese slate.

Dull Chinese Slate Kitchen Floor After Renovation Keston

The sealer adds a new level of depth to the Slate and being an impregnator is hardwearing and long lasting. The new sealer will make the floor much easier to clean in future and on that topic I also recommended the use of Tile Doctor Neutral Tile Cleaner for that purpose.

Neutral Tile cleaner is a pH neutral product that is effective yet mild enough not to impact the integrity of the freshly applied sealer. Many household cleaning products are simply too strong for use on a sealed floor (always check the label) and will break down the sealer which may be the reason for the previous sealer failing in the past.

Professional Renovation of a Chinese Slate Tiled Kitchen in Southeast London

Renovating Chinese Slate Kitchen Flooring in Keston BR2 Read More »