Kent

Terracotta Conservatory Floor Renovation Herne Hill London SE24

Terracotta Conservatory Floor Deep Cleaned and Sealed in Herne Hill SE24

The following photos are of a Terracotta floor I recently worked on in the conservatory of a property in the South London suburb of Herne Hill SE25. The room was going to receive a makeover and they were not sure whether to replace the floor or not. The terracotta tiles were very dirty and although they had tried cleaning it themselves, they struggled to get a result so decided to call in Tile Doctor.

I went over to survey the floor and could see that any sealer that was once on the tiles had completely worn away and without the protection of sealer dirt had become ingrained into the pores of the tile. Once that happens it can be troublesome to remove deep seated dirt from within Terracotta due the porosity of the clay-based tile.

Terracotta Conservatory Floor Before Cleaning Herne Hill London SE24

However, having done quite a few of these floors previously I was confident with the right approach it could be deep cleaned and then a fresh sealer applied to protect it going forward. On the subject of sealers, they told me that they did not want a shiny finish so I quoted the job to clean and seal with an impregnating sealer that would meet their requirements.

I quoted for two days work, one day to clean and one day to seal and with the quote agreed the work was scheduled.

Deep Cleaning a Terracotta Conservatory Floor Tiles

On my return I started the cleaning process by applying a strong dilution of Tile Doctor Remove and Go combined 1 to 1 with Nanotech HBU Remover. Remove & Go is a multipurpose stripper with a long dwell time designed to remove old sealers and ingrained stains and the “Nanotech HBU Remover” is a heavy build-up cleaning product that uses nano sized particles to penetrate below the surface and draw out the ingrained dirt and stains.

Nanotech is a gel like substance and combined with the Remove & Go it makes for a powerful double action tile cleaning product. For maximum results It was left to sit on the floor for 30 minutes without allowing it to dry up or soak in. I then scrubbed the solution into the floor with a black scrubbing pad attached to a rotary floor machine. This action released the dirt from the tile and grout causing the cleaning solution to go black. The resulting slurry was then rinsed away with water extracted using a wet vacuum.

Terracotta Conservatory Floor During Cleaning Herne Hill London SE24

With the floor already looking significantly cleaner I moved onto the next step of giving the tiles and acid rinse using a 1:5 parts dilution of Tile Doctor Grout Clean-up. This product is a phosphoric acid based cleaner, which amongst other things removes efflorescence and lime deposits, being acidic it also neutralises the strong alkaline chemicals used to clean. I apply this solution by hand using stainless steel scouring pads for the tiles and a wire brush for the grout lines. I work in one metre square sections at a time, not allowing the solution to sit on the tiles for more than five minutes before vacuuming up the dirty solution.

One I had cleaned the whole floor with the “Grout Clean-Up” solution I then rinsed it with a steam cleaner. I use a steam cleaner for two reasons, for one it doesn’t soak the floor and the heat means it dries quicker and two any stains still there get drawn out by the steam.

Terracotta Conservatory Floor After Cleaning Herne Hill London SE24

Sealing Terracotta Conservatory Floor Tiles

It’s not good practice to apply a sealer to a damp floor as the dampness can cloud the sealer and result in a patchy appearance. Because of this I always seal on a second day and in this case, I left the floor to dry out fully for two days before returning.

To seal the floor, I used four coats of Tile Doctor Colour Grow which is an impregnating sealer that soaks into the pores of the Terracotta occupying the tiny pores and thereby blocking dirt from becoming ingrained there. Colour Grow as its name suggests improves the natural colours in the tile and in this case it did well to bring out the Orange/Red colours in the Terracotta, it also leaves a matt finish as requested by the client.

Terracotta Conservatory Floor After Sealing Herne Hill London SE24

For aftercare I recommend Tile Doctor Neutral Cleaner, sealers are vulnerable to harsh chemicals so its important to use a cleaner that won’t impact them. It’s always worth checking the small print when buying a cleaner as the wrong product can degrade the sealer and then your back to square one with the floor becoming dirty with ingrained dirt.

 

Professional Renovation of a Terracotta Tiled Conservatory Floor in South London

Terracotta Conservatory Floor Deep Cleaned and Sealed in Herne Hill SE24 Read More »

Stained Encaustic Shower Tiles Renovated in Forest Hill SE23

Stained Encaustic Shower Tiles Renovated in Forest Hill SE23

The client had recently moved into this property in Forest Hill SE23 and the previous owner had used a professional cleaning company to give the house a thorough clean prior to moving out. Unfortunately, they had used an aggressive acid based cleaner on the reclaimed encaustic tiles around the shower, causing white staining. I was contacted to see if it was possible to remove the stains and correctly seal the tiles to protect them.

Encaustic Shower Tiles Before Renovation SE23

I was pleased to tell them it was indeed possible to restore the tiles and we discussed how I would do this. I gave them my quote which they accepted, and we arranged a mutually convenient time to carry out the work. Encaustic tiles are quite unusual they were traditionally made from clay, but today, most modern versions of the tile are made using cement and are often referred to simply as cement tiles.

Cleaning and Restoring an Encaustic Tiled Shower

The first step was to scrub the tiles with a dilution of Tile Doctor Pro-Clean, an alkaline cleaner that is safe to use on Encaustics. The solution was scrubbed into the tile to ensure any remaining soap scum and surface grime was removed. Once done the tiles were rinsed off with water and I moved onto the next of renovating the appearance of the tiles with a set of handheld burnishing pads.

These pads are made from industrial diamonds that clean and remove scratches renovating the surface and closing the pores of the stone. For general cleaning and honing I would normally start with a 400-grit, but with the staining on these tiles, I started with the 200-grit. Once I had gone over all the tiles with the 200-grit pad with water, I then repeated the process with the 400, 800 and 1500 and 3000 pads in sequence. The tiles were rinsed off after each pad and finally left to dry.

Sealing an Encaustic Tiled Shower

Once the tiles had dried it was time to apply a sealer that would further enhance their appearance and protect them. For this I chose to use Tile Doctor Colour Grow as it’s an impregnating, colour enhancing product. It works by soaking into the pores of the tile where dirt can collect, thus protecting it from within.

The sealer was applied thinly with a cloth to all the tiles and allowed to dry for 30 minutes before the next coat was applied. Due to the porosity of these tiles, I applied four coats until I was satisfied, they were fully sealed. Once the tiles were dry, I buffed them with a dry 3000 burnishing pad to leave them with an appealing satin sheen.

Encaustic Shower Tiles After Renovation SE23

The client was pleased with the result and I explained the best way to clean and maintain the tiles for the future would be to use Tile Doctor Aqua-Pro which is designed for use in bathrooms and gentle enough to use every day. They needed to avoid using strong household cleaners on these tiles otherwise the same issue would occur.

 

Professional Renovation of Encaustic Shower Tiling in Kent

Stained Encaustic Shower Tiles Renovated in Forest Hill SE23 Read More »

Deep Cleaning Bathroom Tile & Grout in Beckenham

Deep Cleaning Bathroom Tile & Grout in Beckenham

Recently I was asked to renovate the tile and grout of this windowless bathroom in a Beckenham flat which was not looking its best. The Ceramic tiles had become dull due to a build up of Limescale and the grout had become stained from shampoo dyes and mould.

Ceramic Bathroom Tiles Grout Before Cleaning Beckenham
Without strong ventilation and regular cleaning most bathrooms can end up with these problems however with the right products and techniques they can be renovated as you will see below.

Ceramic Bathroom Tiles Grout Before Cleaning Beckenham

Deep Cleaning Bathroom Tile and Grout

My first action was to apply a liberal amount of Tile Dr Oxy-Gel which is a strong alkaline tile and grout cleaning product that comes in a gel form. Being a gel it’s able to sticks to vertical surfaces for longer allowing it to break down the Limescale and soap residue that had taken up residence. Once it had been left to dwell for around thirty minutes, it was scrubbed off with water and a pan scrapper and then dried with a micro cloth. You can use this process with glazed ceramic tiles like these but for natural stone I would have used a different approach.

I then sprayed Tile Doctor Duo Clean, which is a grout cleaner and mould remover, onto the grout lines. I left the grout with the Duo Clean on it for about ten minutes before scrubbing and rinsing off with water.

The process was repeated where needed until I was happy that the tile and grout were as clean as possible however to really give the bathroom a fresh look I decided to completely renovate the grout with the application of a Grout Colourant.

Grout Colouring Bathroom Wall Tiles

There are ten colours to choose from in the Tile Doctor range of Grout Colourant’s and in this case I felt the best outcome would be to use a White colourant to match the tiles and restore the original look of the bathroom; the customer however wanted a grout colour that would provide a contrast against the white tiles, so in the end we opted for a light grey colour.

The colourant is easily applied directly to the grout and in this case I waited for the tiles to dry before applying two coats with the aid of a small brush making sure to remove any excess that comes into contact with the tile.

I finished the renovation by cutting out the original mastic sealant from around the bath and replacing with a new mould resistant silicone in white to match the bathtub.

Ceramic Bathroom Tiles Grout After Cleaning Beckenham
The bathroom now looks transformed and the epoxy grout colourant adds a layer of protection to the grout that will keep it looking good for some time to come.

Bathroom Tile Renovation in Kent

Deep Cleaning Bathroom Tile & Grout in Beckenham Read More »

Rebuilt Victorian Tiled Hallway Cleaned and Sealed in Bromley

Rebuilt Victorian Tiled Hallway Cleaned and Sealed in Bromley

Not too long ago I was called to the large town of Bromley, where my client was in the process of renovating an Edwardian house. The house has a fascinating original geometric Victorian tiled hallway which had previously been covered in carpet which my client now wanted restoring and extending.

Before beginning my work I had an initial consultation with the client and liaised with the builder. It was agreed that the existing floor joints would be strengthened and the current floorboards would be replaced with ply sheets, allowing for the area to be fitted with new Victorian tiles, ensuring that these were consistent with the original design.

Geometric Victorian Floor Restoration Bromley Before

Restoring a Victorian tiled hallway

The first task was to clean the original tiles so that they would blend in with the fresh, new tiles. To do this I mixed a solution of three parts Tile Doctor Pro-Clean (a high alkaline cleaner) to one part clean water, combined with a small quantity of NanoTech HBU. NanoTech HBU is a penetrating cleaner which uses nano-sized particles to reach areas other cleaners simply can’t in order to lift out difficult stains and ingrained dirt.

This solution was washed over the floor, and was left to dwell for five minutes. I then used my rotary machine with a black pad to agitate and work the solution into the dirty tiles. After completing this initial clean I used a wet-vac machine to hoover up the resulting residue.

There was also some glue residue around the edges of the floor from where carpet grippers had been placed years before. To remove this I used Tile Doctor Remove & Go, which breaks down adhesives, waxes and old sealers. I covered the treated area with plastic to prevent it from drying out, before leaving it to sit for a couple of hours. Once the product had begun to break down the glue I then agitated it with a scrubbing pad to remove the residue. The area was then cleaned with the Pro-Clean/NanoTech HBU solution.

Tiling with Victorian floor tiles

Once the old floor was clean I started laying down the new floor using a matching set of tiles I had managed to source. Victorian tile designs are still very popular so many of the original designs can still be found being made today.

Geometric Victorian Floor Restoration Bromley During Tiling Geometric Victorian Floor Restoration Bromley During Tiling

Once the tiles had been stuck to the new hardboard I was able to give both floors a general clean with a weak dilution of Tile Doctor Pro-Clean to remove any dirt from tiling etc, this was followed by a rinse and the use of a wet vacuum to get the floor as dry as possible before sealing.

Geometric Victorian Floor Restoration Bromley During Tiling

Sealing a Victorian tiled hallway

After leaving the house for more than 24 hours to allow the hallway to dry completely, I returned to seal the tiles. After inspecting the area to ensure no excess moisture remained, I applied five coats of Tile Doctor Seal & Go, a water-based topical sealer, to both the old and new tiles.

This gave the entire hallway a nice sheen finish (as you can see from the photographs), as well as a robust surface seal to protect the tiles from dirt and wear in the future.

Geometric Victorian Floor Restoration Bromley Tiling Complete
Once the sealing process had been completed, it was near impossible to distinguish between the old and new tiles and as you can imagine the customer was very pleased with the end result.

Geometric Victorian Floor Restoration Bromley Sealed
 

Victorian tiled Hallway restored, rebuilt and extended in Kent

Rebuilt Victorian Tiled Hallway Cleaned and Sealed in Bromley Read More »

Reclaimed Quarry Tiles Patio Restoration in New Cross, SE London

Reclaimed Quarry Tiles Patio Restoration in New Cross, SE London

This customer based in New Cross South East London had a significant problem with their patio. Their home is a period Victorian property so when choosing a stone for the patio, they bought reclaimed quarry tiles to marry up with the period of the house, and proceeded with their DIY project. Unfortunately they were not aware that quarry tiles are porous until sealed, and grout left on the tile and not wiped off immediately, will leave a grout haze or in this case stick to the tile altogether.

Quarry Tile Restoration Before
I inspected the tiles and confirmed this was the worst case of grout haze I had ever seen; un-deterred I proceeded to carry out a test clean (you can see this reflected in the photograph below) and this demonstrated successfully that the tiles could be restored.

Quarry Tile Restoration Tester

Cleaning Patio Quarry Tiles

Satisfied with the results of the test clean I proceeded to clean the rest of the floor. For this I used Tile doctor Grout Clean-Up which contains concentrated acid and is designed to penetrate below the surface to remove grout smears; this was diluted 1 to 1 with water which is a very strong mix. I sprayed the solution onto the tiles, working 1sqm at a time, leaving it to dwell on the tiles for a few minutes before scrubbing the tiles by hand with a rough pan cleaner. I then rinsed the area off with water and used my wet vac to remove the soiled solution. The strong mix had the desired effect on the Quarry tiles but it was necessary to go over the area again after spotting some of the worse stains the first application had missed. Happy with the result, I carried out this process across the rest of the patio, working 1 sqm at a time.

Sealing Kitchen Quarry Tiles

When I was finished the customer was very happy with the result, and now had a patio they could use. The customer was keen to carry on with their DIY project, and wanted to seal the patio themselves, so I advised them to use Tile Doctor Colour Grow, which is a colour intensifier and impregnated sealer; this will both protect and enhance the reclaimed quarry tile into the future.

Quarry Tile Restoration After

 

Removing grout haze from reclaimed Quarry Tiles in London

Reclaimed Quarry Tiles Patio Restoration in New Cross, SE London Read More »

Scroll to Top