Dilapidated Red and Black Victorian Tiled Path Restored in Lewisham

This customer contacted Tile Doctor about the dilapidated Victorian tiled path that led up to their property in in Lewisham. It was in quite a state as your can see from the photographs on this page, tree roots had lifted the tiles in certain areas and there were a lot of loose tiles. Intrigued I offered to come and take a look and see what could be done.

After visiting the property, I could see that as well as tiling, some repairs to the foundation due to the tree roots would be needed but generally the path was in solid condition. Also, there was still a good fall to the path so rainwater would drain away easily.

Before becoming a Tile Doctor my trade was tiling so I wasn’t put off by the significant amount of tiling that this project needed. I worked out a quote for the work needed which they were happy to accept and we set a tentative date for my return and hoped for good weather.

Repairing a Victorian Tiled Pathway

The weather was fine so I was able to start work by carefully lifting all the broken and loose tiles and putting them to one side for re-use where possible. This then exposed the path foundation, which needed digging out in in places and backfilling with cement. I also used a grinder to remove any high spots and leave the foundation base as flat as possible.

Next came the tiling which had to match the existing geometrical pattern. I used a combination of the salvaged tiles from earlier which had to be cleaned up and new reproduction tiles that I had managed to source from a specialist supplier. The tiles were laid out dry initially to ensure the pattern was correct and only then were they fixed in place with new adhesive and then grouted. All these repairs may sound straightforward but the work actually took three days to complete.

Deep Cleaning a Victorian Tiled Pathway

The path was then left to set overnight and I returned later to give them a deep clean. To do this I started with a strong combination of Tile Doctor Remove & Go and Nanotech HBU stain remover. This was sprayed onto the path and left to soak in for a good ten to fifteen minutes to give it time to break down the grime and dirt that had built up over the years. The solution was then scrubbed in using a coarse 50-grit diamond pad fitted to a rotary machine.

The dirt released from the tiles was rinsed off and extracted with a wet vacuum and the process repeated, this time with Tile Doctor Acid Gel and a 100-grit then 200-grit diamond pad. This process deep cleans and hones the tile removing ingrained dirt and improving their appearance. The path was rinsed and soiling extracted afterwards, then left to dry off overnight.

Sealing a Victorian Tiled Pathway

The weather held out and I returned the next day to seal the tiles using three coats of Tile Doctor Colour Grow which is a breathable colour enhancing impregnating sealer. Impregnators work by soaking into the pores of the tile, occupying the pores and thereby preventing dirt from becoming ingrained there.

The customer was very pleased with the results and the path has been saved for another 100 years. The new sealer would ensure dirt remains on the surface where it can be easily cleaned away for which I recommended using Tile Doctor Neutral Tile Cleaner.

 

Professional Restoration of a Victorian Tiled Pathway in Southeast London